Base Resin : Modified Olefin,copolymer Fiber Length : 40 mm Specific Gravity : 0.91 Tensile Strength : (520 MPa ) Young’s Modulus : (3.6 GPa) |
MEX200 FIBER
PRODUCT DESCRIPTION: MEX200 is macro synthetic reinforcing fiber complying with ASTM C 1116, Type III. MEX200 is 100% virgin copolymer fiber deisgned to provide a uniform three dimensional reinforcement system in the concrete mix. Specifically engineered and manufactured in an ISO 9001 certified manufacturing facility. |
USES: MEX200 can be successfully used as a safe and simple alternative to wire mesh and rebar. Due to its mechanical properties MEX200 is recommended for use in following applications: ▪ Slab on ground ▪ Precast ▪ Pavement ▪ Composite Metal Deck
CHARACTERISTICS / ADVANTAGES: ▪ Geometrically engineered to resist matrix pullout ▪ Increases flexural toughness ▪ Increases cohesion and reduces segregation ▪ Increases impact and shatter resistance ▪ Non-magnetic ▪ Rustproof ▪ Chemically inert and alkali proof ▪ Reduced wear on concrete pumps and hoses ▪ Safe and easy to handle ▪Simplified logistics ▪ Economical alternative to steel wire mesh and/or steel fibers ▪ Reducing embodied carbon through the replacement of convention steel reinforcement with synthetic structural fibers.
APPROVALS / STANDARDS: MEX200 is UL/ULc certified and approved for usage in all D700, D800 and D900 series decks as an alternate to welded wire fabric
▪ Complies with ASTM C1116 / C1116M Type III Fiber Reinforced Concrete and ASTM D7508 / D7508M
▪ Complies with European Standard EN 14889-2: 2006 Fibres for Concrete Part 2: Class II
Recommended Dosage:
The dosage of the MEX200 will vary according to the type of application and the performance requirements of the project. Standard recommended dosage rate of MEX200 is between 3–7 lbs/cu. yd. (1.8–4.15 kg/m3) of concrete. Dosages outside the recommended dosage range can be used to meet project specific requirements. If this is the case please contact your MESOON representative for technical support.
|